DREWNOCHRON IMPREGNAT TEAK 4.5L

WOODCHRON EXTRA-COATING IMPREGNATE

Aqua Stop System - perfect protection against water
Preserves the natural grain of the wood
7 years coating protection* 

PURPOSE

Wood preservative for the protective and decorative painting of wooden objects outdoors (doors, windows, garden furniture, outdoor panelling, summer houses, fences, ceiling and roof structures, etc.) and indoors in rooms not intended for permanent occupation, e.g. attics, lofts. Aqua Stop System is a technology that perfectly protects the surface of the wood against the ingress of water, which runs off the coating easily.

DESCRIPTION

Impregnate for the protective and decorative coating of wooden objects indoors and outdoors. 

MAIN BENEFITS

- Aqua Stop System - perfect protection against water
- Water-repellent coating, resistant to rain, snow and the sun
-Protection of wood against UV radiation
-Optimal adhesion to wood
- Preserves the natural grain of the wood
- Coating protected against mould and algae
- 7 years cover protection*.
* Apply to properly prepared, non-infected and seasoned wood with adequate moisture content. Apply according to manufacturer's instructions: 1-2 coats of Woodnochron Impregnate Primer R, min. 2 coats of Extra Coating Impregnate (at least 350 g/m2). For vertical surfaces in the absence of strong sunlight, in an airy and damp place. The use of the product on an industrial scale and with industrial methods is excluded, by which is meant the use of the product in connection with a business activity.

TECHNICAL DATA

Gloss finish: Semi-matt

Spreading rate: up to 12 m2 / l, with one coat, depending on surface absorption and roughness

Thinner: General purpose phthalic solvent.

Application method: Brush

Drying time: 16h, apply another coat after 16 hours, recommended number of coats: 2.

APPLICATION INSTRUCTIONS
Application conditions
The air temperature during painting and seasoning should be between +5°C and +30°C. The optimum temperature of the substrate
during painting should be +15 to +25 ºC. The humidity of the wood should not exceed 11 % indoors and 15 % outdoors.
Store in tightly closed packaging.
Surface preparation
The surface to be painted should be clean, dry and degreased. Dirty surfaces should be sanded and dedusted.
dust off. Prime raw wood with Drewnochron Impregnator Grunt R. Surfaces previously painted with
surfaces previously painted with wood preservative: remove grease, sand down and dust off.
Stir the impregnate thoroughly before use and before application.
Uniformity of colour is achieved after thorough mixing of the product.
Apply Woodnochron Impregnate evenly with a brush, preferably along the grain. Do not apply an excessive amount of impregnate.
Impregnate should not be applied in excessive amounts. In order to achieve the best and long-lasting biological protection of the raw wood, apply 1 to 2 coats of Woodnochron Primer R marki.
Woodnochron R primer, followed by 2 coats of Extra-coating impregnate. Impregnation
should be carried out at a substrate and ambient temperature of +5 to +30 °C.
Increased humidity and low temperatures will prolong the drying time. The final decorative effect depends on
The final decorative effect depends on the species of wood and the number of layers of the Extra Coating Primer applied.
Recommended thinner: General-purpose phthalic thinner.

Attention
During and after painting, ventilate the rooms before use until the characteristic
odour disappears. The conditions under which the paint is applied determine the drying time of the product and the properties of the paint film.
When carrying out touch-up painting, carry out a test painting of a small area. If an undesirable effect develops after drying, the old
If an undesired effect develops after drying, the old coating must be completely removed and the substrate repainted.
Not to be used for the protection of terrace floors.